Concealed Hinges

Pair of florentine bronze pivot hinges for cabinets where the hinges are required to be hidden
Allows the cupboard door to be opened more than 90 degrees
Surface or flush mount on top and bottom of cabinet door

Dimensions (mm)
Length	Width	Depth
70	12	2

Contents
2	x	Hinges

Traditional 110 degree kitchen cabinet hinges in bright zinc alloy
A 35mm hole is typically drilled into the inside of the cabinet door to a depth of 11.5mm to take the body cup of the hinge
These kitchen cupboard hinges can be adjusted both laterally, vertically and also by using the inner screw govern how far the door sits away from the cabinet
These hinges benefit from using a clip-on mounting plate (supplied) so that using the button at the end of the arm they can be simply and quickly removed or re-mounted for further adjustment if necessary

Dimensions (mm)
Length	Width	Depth
95	35	11.5

Contents
2	x	Hinges
2	x	Mounting Plates

Soft-close 110 degree kitchen cabinet hinges in bright zinc alloy which slow down the speed of the door closing so as to avoid it either slamming into the cabinet or needing to fit cabinet door dampers (Code H071B)
A 35mm hole is typically drilled into the inside of the cabinet door to a depth of 11.5mm to take the body cup of the hinge
Kitchen cupboard hinges can be adjusted both laterally, vertically and also by using the inner screw govern how far the door sits away from the cabinet

Dimensions (mm)
Length	Width	Depth
95	35	11.5

Contents
2	x	Hinges
2	x	Mounting Plates

35mm Concealed hinges allowing cabinet door to be opened up to 165 degrees to allow easier access into the cupboard or cabinet in sturdy zinc alloy
A 35mm hole is typically drilled into the inside of the cabinet door to a depth of 11.5mm to take the body cup of the hinge
These kitchen cupboard hinges can be adjusted both laterally, vertically and also by using the inner screw govern how far the door sits away from the cabinet
The hinge mounts (supplied) are clip-on so that using the button at the end of the arm they can be simply and quickly removed or re-mounted for further adjustment if necessary

Dimensions (mm)
Length	Width	Depth
95	35	11.5

Contents
2	x	Hinges
2	x	Mounting Plates

Smaller type 110 degree cabinet hinges used more often on wardrobe doors in bright zinc alloy
A 26mm hole is typically drilled into the inside of the cabinet door to a depth of 11.5mm to take the body cup of the hinge
These kitchen cupboard hinges can be adjusted both laterally, vertically and also by using the inner screw govern how far the door sits away from the cabinet

Dimensions (mm)
Length	Width	Depth
95	35	11.5

Contents
2	x	Hinges
2	x	Mounting Plates

Easy-On Hinge allowing 90 degree kitchen cabinet hinges in bright zinc alloy
This type of sprung closing hinge is far easier to fit as it is just screwed directly on to the face of the door and side of the cabinet
Four of the screw holes are elongated allowing small lateral adjustments when fitting the door and before using the four remaining locking screws

Dimensions (mm)
Length	Width	Height
97	42	33

Contents
2	x	Hinges
2	x	Mounting Plates